A garage or shed workshop can start with a bench and a drill and grow into a room full of machines: a pillar drill, a mitre saw, a bench grinder, a compressor, perhaps a lathe or a welder. It pays to plan the basics before the machines arrive. This article covers the building and the set-up; for each machine, our guides and the maker's manual cover how to use it.
Power: more sockets is a job for an electrician
Workshop machines draw a lot of current, and a single extension reel trailing from the house is not a long-term answer. If you need new sockets or a supply to an outbuilding, talk to a qualified electrician.
The Planning Portal sets out when home electrical work has to be notified under the Building Regulations (Part P) in England. Notifiable jobs include installing a complete new circuit and replacing a consumer unit (fuse box). Other work in a garden, garage or shed still has to comply with the Building Regulations. The Planning Portal recommends using an installer registered with a competent person scheme, who can self-certify the work; if you do notifiable work yourself, you must tell a building control body before you start. If you're unsure whether a job is notifiable, ask your council's building control team. Rules in Wales differ slightly.
When you brief the electrician, take a list of the machines and their supply needs from the makers' specifications. Most of the machines on this site use an ordinary 13 A plug, but some larger ones need more — a few welders, for example, state a 16 A supply.
RCD protection and cable checks
HSE says an RCD rated at no more than 30 mA limits the energy in certain electric shocks and can save your life. Ask your electrician whether the workshop circuits are RCD-protected, and press the test button regularly — HSE says to make sure it trips. A plug-in RCD only protects what's plugged into it.
Before each use, look at plugs and cables with the machine unplugged. HSE's checklist: no damage, the cable properly held in the plug with no inner wires showing, and no repairs with insulating tape. Route cables so they aren't a trip hazard and won't be cut or crushed — an easy mistake around a saw or a lathe.
Dust: capture it at the machine
Dust is the hazard people underestimate. HSE warns that wood dust can cause asthma and that hardwood dust can cause cancer, particularly of the nose. Its advice is to fit dust extraction at woodworking machines, never to sweep up or use compressed air (both put dust back in the air you breathe), and to clean up with a vacuum that at least meets the M class. For very dusty jobs such as sanding, a suitable mask is needed as well.
In practice that means:
- An extractor or a dust-class vacuum connected to each dust-making machine while it runs.
- A vacuum, not a brush, for the floor and bench.
- A properly fitted FFP mask for sanding and other dusty work.
Our guide to wood dust and dust extraction explains dust classes L, M and H and the different kinds of extractor. Some to compare:
Dust extraction
Makita VC2512L Dust Extractor
- Key figures
- Dust class L · 25 l · 3.6 m³/min · 210 mbar
- Power
- Mains electric, 1,000 W
- Good for
- Connecting to sanders, saws and drills
A wet and dry extractor with a power take-off socket, so it starts and stops with the tool plugged into it.
Details of Makita VC2512L Dust Extractor Search Amazon for this — Makita VC2512L Dust Extractor (opens Amazon.co.uk)
Dust extraction
Kärcher WD 6 P S V-30/8/22/T
- Key figures
- 30 l stainless tank · 280 mbar · 75 l/s
- Power
- Mains electric, 1,300 W
- Good for
- Garage, workshop and DIY clean-ups, with a socket for power tools
A large wet and dry vacuum with a tool socket that switches it on with your power tool, plus a filter-cleaning function.
Details of Kärcher WD 6 P S V-30/8/22/T Search Amazon for this — Kärcher WD 6 P S V-30/8/22/T (opens Amazon.co.uk)
Dust extraction
Kärcher WD 3 P V-17/6/20
- Key figures
- 17 l tank · 230 mbar · 45 l/s
- Power
- Mains electric, 1,000 W
- Good for
- Small workshops and light DIY dust
A smaller wet and dry vacuum with a tool socket and an adapter for connecting power tools.
Details of Kärcher WD 3 P V-17/6/20 Search Amazon for this — Kärcher WD 3 P V-17/6/20 (opens Amazon.co.uk)
As an Amazon Associate we earn from qualifying purchases. Most Amazon links open a search on Amazon.co.uk, where you can see the current price, sellers and delivery. We don’t show prices, ratings or Amazon’s photos.
Noise
A workshop is a box that reflects sound. HSE notes that decibels work on a logarithmic scale — a 3 dB increase doubles the noise — and that woodworking machines such as thicknessers and moulders can reach around 100 dB or more at work. Its advice includes maintaining machines and extraction, choosing quieter tooling and enclosing noisy machines. At home, add soft surfaces where you can, keep doors shut towards the neighbours, and wear hearing protection. See noise and hearing protection and our article on noise and neighbours.
Fire
Sawdust, shavings, oily rags, solvents and petrol are all fuel, and grinders and welders throw sparks. Keep the workshop tidy, empty the extractor before it is full, keep sparks away from dust and flammables, and store petrol as HSE describes in storing petrol at home — never in your living space. A smoke alarm suited to a dusty workshop and a fire extinguisher by the door are worth asking a fire-safety supplier about.
Layout
- Give each machine its working space. Allow room in front of and behind a saw for the full length of the board, and space round a lathe to stand clear of the line of the work.
- Fix machines down where the maker says to — bench grinders and pillar drills usually need bolting to a bench or stand.
- Good light on the work, without shadows from your own body.
- A clear exit that isn't blocked by timber or the car.
- Children and pets out, and machines isolated when you're not there.
Protective kit by the door
Keep the basics where you'll pick them up every time: EN 166 safety glasses, ear defenders and FFP3 masks. Our guide to eye, face and breathing protection explains the ratings.
Machines for the bench
When you're ready to choose machines, these are on the site:
Workshop machines
SIP 6" Professional Bench Grinder (07625)
- Key figures
- 150 mm wheels · 2,980 rpm · 370 W (S2 30 min)
- Power
- Mains electric (230 V, 13 A)
- Good for
- Sharpening chisels, drill bits and garden tools
A compact bench grinder with a coarse and a fine wheel plus a wire wheel, built on a cast steel base.
Details of SIP 6" Professional Bench Grinder (07625) Search Amazon for this — SIP 6" Professional Bench Grinder (07625) (opens Amazon.co.uk)
Workshop machines
SIP 8" Professional Bench Grinder (07628)
- Key figures
- 200 mm wheels · 2,980 rpm · 550 W (S2 30 min)
- Power
- Mains electric (230 V, 13 A)
- Good for
- Heavier grinding and shaping in a metal workshop
The bigger version of SIP’s pro bench grinder, with wider 200 mm wheels and a stronger motor.
Details of SIP 8" Professional Bench Grinder (07628) Search Amazon for this — SIP 8" Professional Bench Grinder (07628) (opens Amazon.co.uk)
Workshop machines
SIP 8" x 2" Bench Grinder / Linisher (01459)
- Key figures
- 200 mm wheel + 710 × 50 mm belt · 2,980 rpm
- Power
- Mains electric (230 V, 13 A), 550 W (S2 30 min)
- Good for
- Grinding, shaping and smoothing metal
A two-in-one machine: a grinding wheel on one side and a tilting sanding belt (linisher) on the other.
Details of SIP 8" x 2" Bench Grinder / Linisher (01459) Search Amazon for this — SIP 8" x 2" Bench Grinder / Linisher (01459) (opens Amazon.co.uk)
As an Amazon Associate we earn from qualifying purchases. Most Amazon links open a search on Amazon.co.uk, where you can see the current price, sellers and delivery. We don’t show prices, ratings or Amazon’s photos.
Before running any of them, read the maker's manual and the guides to bench grinder safety and table saw and mitre saw safety.



